Custom No-cut Table Tents
Custom no-cut table tents from 100 — printed card scored to fold into a standing triangle, with no die-cutting, slots or glue, which makes them the quickest and most affordable table tent to produce for promotions that change often.
A table tent with nothing cut out of it
- Stock
- 14–16 pt coated card; uncoated or laminated options
- Folds
- Two-score A-frame or three-score triangle
- Closure
- Tucked tab, glue dot or tape
Get a price for No Cut Table Tents
Send the size and quantity — we reply the same working day with a price, a dieline and a date. Artwork optional at this stage.
- Free dielineThe flat drawing comes with the quote, before you commit.
- Proof before pressNothing is printed until you have seen it laid on the dieline.
- Die kept for reordersTooling is paid once. Every reorder skips straight to press.
- Quoted in four marketsUS, UK, Canada and Australia, in the delivery currency.
How a no-cut tent stands
- Two scores make a two-sided A-frame; the ends rest on the table.
- Three scores make a triangle; the third panel lies flat as a base.
- A glue dot or tape tab holds the triangle closed.
- Heavier card stands better and resists curling.
When to choose no-cut over die-cut
For a tent that locks together without tape, our slot-locked table tents are the die-cut alternative.
| Weekly or monthly promotions | No-cut: cheap to reprint |
|---|---|
| Short runs and test designs | No-cut: no die to pay for |
| Outdoor or windy tables | Die-cut slot tent: locks and stands firmer |
| Premium or shaped tents | Die-cut: arched tops and custom outlines |
Card weight for a tent that stands
A 14 to 16 pt coated card is the usual choice: stiff enough to stand, thin enough to fold cleanly on the score. A gloss or matte coating keeps the print bright; a laminate adds wipe-clean durability for restaurant tables. Uncoated card suits a handwritten or natural look.
Who uses them
Cafes and bars for specials, hotels for room-service and events, offices for meeting notices, trade shows for product callouts, and schools for events. Wherever a message changes often, a no-cut tent keeps the cost of changing it low.
No Cut Table Tents — specification
The rows that are specific to this build first, then what applies to every job we run. Anything not listed is a question, not a limit — send the brief.
This build
- Stock
- 14–16 pt coated card; uncoated or laminated options
- Folds
- Two-score A-frame or three-score triangle
- Closure
- Tucked tab, glue dot or tape
- Sizes
- 4 × 6 in, 5 × 7 in, 4.25 × 11 in and custom
- Full color on all faces
- Delivery
- Flat and scored
- Minimum
- 100 tents
On every job
- Print process
- Digital below about a thousand, offset above it. Both sides as standard on cards, tags and leaflets.
- Color
- CMYK with spot colors for a brand match. Uncoated and cotton stocks print noticeably lighter than coated ones.
- Tolerance
- Trim plus or minus 1 mm guillotined, plus or minus 0.5 mm die-cut. Anything over about 170gsm is creased before folding.
- Tooling
- A die only where the piece is shaped, perforated or drilled, made once and kept. A plain rectangle needs none.
- Food contact
- Food-safe inks on menus and counter print that will be handled where food is served.
- Sustainability
- Uncoated and unlaminated stocks recycle without separation, and FSC papers are available across the range.
- Artwork
- Vector PDF or AI, 3 mm bleed, 4 mm safe area, fonts outlined. We check every file and send a proof before press.
- Dieline
- Supplied free with the quote, before you commit. Yours whether or not you order.
- Sample
- A plain unprinted sample at the finished size on request, for fit and construction.
- Reorders
- Skip the tooling and go straight to press at a lower unit price.
- Lead time
- Quoted with the price against your fill date rather than promised before we have seen the spec.
- Markets
- United States, United Kingdom, Canada, Australia — priced in the delivery currency, freight included.
Boards and films we build no cut table tents on
Sheet print is judged in the hand more than a box is: the weight, the surface and whether a pen works on it. These are the stocks we run for cards, folders, leaflets and stationery.
Coated card 300–400gsm
The workhorse. Sharp full-color print, matte or gloss, laminated where it is handled. Does not take a pen unless the finish is matte.
300–400gsmUncoated card
No clay coat. Colors read softer and warmer, a deboss goes deeper, and it writes on with anything. Photographs lose punch.
300–400gsmCotton and textured card
Soft, thick and fibrous. Takes a deep blind deboss and reads as an invitation. Foil sits beautifully; four-color does not.
400–700gsmDuplexed card
Two sheets bonded, often with a colored core, for a very thick card with a visible colored edge. The heaviest thing we print.
600–900gsmText paper 100–170gsm
Leaflets, folder inners and booklet pages. Folds without cracking and takes a full-color print on both faces.
100–170gsmManila and kraft paper
Unbleached, tan, and cheap. One or two colors read well; white ink gives a light mark. Envelopes, folders and tags.
90–300gsmSynthetic stock
Polypropylene sheet for tags and cards that get wet, torn or handled outdoors. Prints like paper and does not soften.
200–400 micronBoard-backed
A printed face laminated to grayboard, for a rigid card, a folder back or a display that has to stand up on its own.
1–2 mm boardNot sure which? Say what goes in it and where it is sold — the material follows from that. Our notes on recycled, recyclable and compostable cover which claims each stock can honestly carry.
- 01
Send what you have
A dimension, a photograph beside a ruler, or the product itself. No technical drawing needed — that part is ours.
- 02
We quote and draw
A price, a dieline and a date come back together. If a different build would suit the product better, that is in the reply too.
- 03
Approve the dieline
The flat drawing is yours to check: which panel is the front, where the folds fall, how deep the cavity really is.
- 04
Artwork on the dieline
You place your design on the flat we sent, or we place it for you, and you see a proof before anything goes to press.
- 05
A sample if you want one
A plain unprinted sample at the finished size shows fit and construction — the things a drawing cannot.
- 06
Cut, printed, shipped
The die is cut once and kept, so every reorder skips the tooling and goes straight to press at a lower unit price.
Format
Vector PDF or AI where possible. Raster artwork at 300dpi at final size, in CMYK.
Bleed
3 mm past every trim line, so a fraction of drift on the cutter never leaves a white edge.
Safe area
Keep type and anything important 4 mm inside the cut and away from every fold.
Color
Convert to CMYK before sending. Uncoated stock prints lighter; a spot color is the only exact match.
Fonts
Outline them or supply the files. A missing font substitutes silently and the proof will not match.
Barcodes
On a light, matte, unvarnished patch with the quiet zone clear — a code on gloss fails the scanner.
Not set up that way? Send it anyway — fixing a file is a short conversation, and we check every one before press. Our guide to preparing print files covers each point.
Sheet print takes the widest range of finishes of anything we make.
Matte lamination
Soft, fingerprint-resistant, and it still takes a pen. The default on anything handled.
Gloss lamination
Maximum color depth. Shows every fingerprint and refuses a ballpoint.
Hot foil
Gold, rose gold, silver, holographic or a color. The block is small so the die is cheap.
Emboss and deboss
Deepest on uncoated and cotton stocks; shallow and prone to cracking on gloss coated.
Spot UV
A gloss shape on a matte laminate. Best on a dark ground where the contrast reads.
Edge paint and colored core
Color on the cut edge of a thick or duplexed card. Only seen when the card is picked up, which is the point.
Soft-touch
A velvet laminate on a cover or a folder. Marks on white; excellent on dark.
Uncoated and textured
No film at all. Writes on, debosses deeply, and reads as considered rather than cheap.
Not sure which suits the shelf it sells from? Say where the product is sold and we suggest one — our notes on specialty finishes show them on real boxes.
Sizing printed sheets, folds and the grain: no cut table tents
A printed piece is specified flat and finished folded, and the difference between the two is where mistakes live. Send the finished size you want and we work back to the flat.
- Finished size
- The size after folding and trimming. A6, A5, A4, DL, US letter and legal are standard; anything else is cut on its own die.
- Bleed and safe area
- 3 mm of artwork past every trim edge, and nothing important within 4 mm inside it. The guillotine drifts by a fraction on every stack.
- Grain direction
- Paper folds cleanly along the grain and cracks across it. We set the grain to the fold, which is why a sheet is not simply cut from the biggest sheet available.
- Fold allowance
- On a roll fold or a gate fold, the inner panels are cut a millimeter or two shorter so the piece closes flat.
- Creasing
- Anything over about 170gsm is creased before folding. Without it the fold cracks and the coating flakes along the line.
- Trim tolerance
- Plus or minus 1 mm guillotined, plus or minus 0.5 mm die-cut.
Not sure your numbers are right? Send the product dimensions rather than the box dimensions and we work the box out — the full method is in our guide to measuring for a box.
Interactive · five steps · no sign-up
Spec your No Cut Table Tents
Pick a shape, type a size, choose a stock and a finish. The preview on the left redraws as you go, and the spec lands with us exactly as you set it.
Frequently asked questions
Got a question about no cut table tents? The answers below cover what we get asked most. If yours is not here, send it with a brief, message us on WhatsApp, or call +1 503-461-4788 — we reply the same working day.
What is a no-cut table tent?
A printed card scored to fold into a standing tent, with no die-cutting.
Why choose a no-cut tent?
No cutting die means lower setup cost, ideal for short runs and changing promotions.
How does it stay closed?
A tab tucked under, a glue dot or a small piece of tape.
Is it as sturdy as a die-cut tent?
On heavy card it stands well indoors. Slot-locked tents stand firmer outdoors.
Can I print all three sides?
Yes, including the base panel on a three-score tent.
What sizes are available?
4 × 6 in, 5 × 7 in, 4.25 × 11 in and custom sizes.
Can they be laminated?
Yes, for wipe-clean restaurant use.
Do they arrive folded?
Flat and scored, ready to fold.
Are no-cut tents cheaper?
Usually, especially on short runs, because there is no die.
Can I change the design every week?
Yes, that is what they are best for.
What is the minimum order for no-cut tents?
100 tents per design. With no die to pay for, short weekly runs stay affordable.
How quickly can no-cut tents be printed?
They are among the fastest tents to make because there is no die-cutting. We give a date with the quote.
Same range
