Custom CBD Isolate Boxes
Custom CBD isolate boxes for jars, vials and sachets — a small carton with an insert for the jar, a tamper seal and the compliance panel your market needs — from 100. Dieline and price the same working day.
A gram of powder in a jar, and a box that says exactly what it is
- Board
- 18–20pt coated boxboard; wrapped grayboard for bulk jars
- Builds
- Small tuck carton with platform, vial sleeve, sachet carton, dispenser box, rigid
- Tamper
- Perforated tuck, tear strip, seal sticker; shrink band on the jar
Get a price for Cbd Isolate Boxes
Send the size and quantity — we reply the same working day with a price, a dieline and a date. Artwork optional at this stage.
- Free dielineThe flat drawing comes with the quote, before you commit.
- Proof before pressNothing is printed until you have seen it laid on the dieline.
- Die kept for reordersTooling is paid once. Every reorder skips straight to press.
- Quoted in four marketsUS, UK, Canada and Australia, in the delivery currency.
Containers and the box around them
| Glass jar, 1–5 g, 30–40 mm | Small tuck carton with a platform; or a slim rigid box |
|---|---|
| Vial, 0.5–1 g | A slim carton or a sleeve over a labeled vial; a slot insert |
| Sachet, 1 g | A flat carton or an envelope-style pack; a dispenser box of 10 or 25 |
| Bulk jar, 10–50 g | A heavier carton or a rigid box with a flocked insert |
Tamper evidence on a small box
Isolate is bought for purity and the seal is the proof. Two of the four is usual: a perforated tuck on the box and a shrink band on the jar.
- A perforated tuck that tears on first open.
- A glued seam with a tear strip.
- A seal sticker across the flap, printed with the brand.
- A shrink band on the jar inside, in addition to the box.
The panel on a 50 mm box
Content per gram, purity, THC statement, warnings, batch, expiry, a QR to the certificate of analysis and a barcode — on a carton the size of a matchbox. The dieline reserves the back and one end for it at a legible size, which sets the minimum box before the design starts. Our CBD oil boxes for dropper bottles carry the same panel on a taller box.
We reserve the panel and check the proof against your approved wording. We do not draft the regulatory text.
Print for a product sold on purity
White or pale grounds, one color and a clear type hierarchy, a purity figure large. A matte laminate, a small foil mark if the brand uses one. The look is a laboratory, not a gift. Inside, plain — powder and crystal are not to be near ink.
Small runs and a range of weights
Isolate ranges are one jar in two or three weights: one die, a print change per weight, a reserved batch area for a sticker at filling. A hundred cartons is a first run; the die and the print file are kept.
Cbd Isolate Boxes — specification
The rows that are specific to this build first, then what applies to every job we run. Anything not listed is a question, not a limit — send the brief.
This build
- Board
- 18–20pt coated boxboard; wrapped grayboard for bulk jars
- Builds
- Small tuck carton with platform, vial sleeve, sachet carton, dispenser box, rigid
- Tamper
- Perforated tuck, tear strip, seal sticker; shrink band on the jar
- Compliance
- Back and end panel reserved; QR to COA; batch sticker area
- 1–2 colors on white; matte laminate; foil mark optional; plain interior
- Range
- One die, print change per weight
- Minimum
- 100 boxes
On every job
- Print process
- Digital below about a thousand, offset above it. One side or both, with spot colors where a match has to hold.
- Color
- CMYK as standard. Uncoated and kraft stocks print lighter and warmer; a spot color is the only exact match.
- Tolerance
- Cutting plus or minus 1 mm, creasing plus or minus 0.5 mm, confirmed on a plain sample before the run.
- Tooling
- A cutting die per size, made once and kept. Foil and emboss dies per artwork, also kept.
- Food contact
- Food-grade board and inks where the carton touches food, with the interior left plain.
- Sustainability
- Mono-material board wherever the product allows; recycled-content and FSC stocks; no claim printed the pack does not earn.
- Artwork
- Vector PDF or AI, 3 mm bleed, 4 mm safe area, fonts outlined. We check every file and send a proof before press.
- Dieline
- Supplied free with the quote, before you commit. Yours whether or not you order.
- Sample
- A plain unprinted sample at the finished size on request, for fit and construction.
- Reorders
- Skip the tooling and go straight to press at a lower unit price.
- Lead time
- Quoted with the price against your fill date rather than promised before we have seen the spec.
- Markets
- United States, United Kingdom, Canada, Australia — priced in the delivery currency, freight included.
Boards and films we build cbd isolate boxes on
A folding carton is one sheet of board, so the board is the product. These are the stocks we run for cartons, what each is good at, and where it lets you down.
Natural kraft
Unbleached folding board. Warm, hides marks, costs least. Mutes color — one or two flat colors print well, photographs do not.
250–350gsm sleeves; 14–24pt cartonsWhite SBS
Solid bleached sulfate: bright, coated, the retail carton standard. Takes accurate color and every finish. Shows scuffs sooner than kraft.
14–24ptWhite lined chipboard
A recycled gray core under a white printing face. Cheaper than SBS and slightly duller; the back of the sheet stays gray.
16–24ptKraft-look coated
A kraft face over a coated inner. The natural look with a barrier behind it — the answer where oil, grease or moisture would mark plain kraft.
14–20ptRecycled-content board
Post-consumer fiber with a gray-brown cast. Right for outers and inner components; poor for bright whites and photography.
16–22ptMicro-flute E and F
A fine corrugated layer where a carton needs structure it cannot get from board — a large panel, a heavy product, a box that ships alone.
E 1.5 mm; F 0.8 mmUncoated and textured
No clay coat, or a linen or laid grain. Print reads softer and warmer; a deboss goes deeper. Photographs do not sit well on it.
280–350gsmMetallised and pearlescent
A metallic or pearl face for a shelf that needs to catch light. Costly, and it fights a photograph — a mark or a pattern suits it better.
16–20ptNot sure which? Say what goes in it and where it is sold — the material follows from that. Our notes on recycled, recyclable and compostable cover which claims each stock can honestly carry.
- 01
Send what you have
A dimension, a photograph beside a ruler, or the product itself. No technical drawing needed — that part is ours.
- 02
We quote and draw
A price, a dieline and a date come back together. If a different build would suit the product better, that is in the reply too.
- 03
Approve the dieline
The flat drawing is yours to check: which panel is the front, where the folds fall, how deep the cavity really is.
- 04
Artwork on the dieline
You place your design on the flat we sent, or we place it for you, and you see a proof before anything goes to press.
- 05
A sample if you want one
A plain unprinted sample at the finished size shows fit and construction — the things a drawing cannot.
- 06
Cut, printed, shipped
The die is cut once and kept, so every reorder skips the tooling and goes straight to press at a lower unit price.
Format
Vector PDF or AI where possible. Raster artwork at 300dpi at final size, in CMYK.
Bleed
3 mm past every trim line, so a fraction of drift on the cutter never leaves a white edge.
Safe area
Keep type and anything important 4 mm inside the cut and away from every fold.
Color
Convert to CMYK before sending. Uncoated stock prints lighter; a spot color is the only exact match.
Fonts
Outline them or supply the files. A missing font substitutes silently and the proof will not match.
Barcodes
On a light, matte, unvarnished patch with the quiet zone clear — a code on gloss fails the scanner.
Not set up that way? Send it anyway — fixing a file is a short conversation, and we check every one before press. Our guide to preparing print files covers each point.
Every finish here is a decision about light on a shelf, not about luxury.
Matte lamination
Reads considered, hides marks, takes a ballpoint.
Gloss lamination
Lifts color; glares under shop lighting.
Soft-touch
Velvet in the hand; shows fingerprints in a bag.
Hot foil
Real metal leaf — the most reliable premium signal.
Emboss / deboss
Shape with no ink; works in the dark.
Spot UV
Gloss shapes on a matte field.
Uncoated kraft
Warm, natural, mutes color.
Textured stock
Texture in the paper; cannot scuff off.
Not sure which suits the shelf it sells from? Say where the product is sold and we suggest one — our notes on specialty finishes show them on real boxes.
Sizing a folding carton so the die comes out right: cbd isolate boxes
Measure the product, not the box it is in now. A carton is built around what has to fit inside it, assembled — cap on, lid fitted, folded if it folds — at its widest point in each direction. Send those three numbers and say which is which.
- Length x width x height
- Internal, always. External dimensions include the board and are what the carrier measures, not what the product needs.
- Clearance
- 2–3 mm a side for a snug fit; more where an insert or void fill goes in. A carton cut exactly to the product is slow to pack and transmits every knock.
- Board thickness
- Heavier board takes internal space from the product. It matters most on small boxes, where four walls of 24pt is a real share of the cavity.
- Varies between batches?
- Glass, textiles, molded parts and cured soap all do. Measure several and build to the largest.
- Cutting tolerance
- Plus or minus 1 mm on folding board. Confirmed on a plain sample before the run.
- Units
- Metric or imperial, as long as you say which. Mixing them in one spec is where mistakes happen.
Not sure your numbers are right? Send the product dimensions rather than the box dimensions and we work the box out — the full method is in our guide to measuring for a box.
Interactive · five steps · no sign-up
Build your Cbd Isolate Boxes in 3D
Pick a shape, type a size, choose a board and a finish. The preview on the left redraws as you go, and the spec lands with us exactly as you set it.
Frequently asked questions
Got a question about cbd isolate boxes? The answers below cover what we get asked most. If yours is not here, send it with a brief, message us on WhatsApp, or call +1 503-461-4788 — we reply the same working day.
What sizes of jar do you box?
From a 0.5 g vial to a 50 g bulk jar. Send the container and we size the carton and the insert.
Is the box tamper-evident?
Yes, with a perforated tuck or a tear strip, and usually a shrink band on the jar as well.
Can the compliance text fit on a small box?
Yes, by reserving the back and one end at a legible size, which sets the minimum box size before the design starts.
Do you write the regulatory wording?
No. We reserve the panel and check the proof against your approved text.
Can I have a QR to the lab certificate?
Yes, on the panel.
What is the minimum order?
100 boxes.
Can one carton serve several weights?
Yes, one die and a print change per weight, with a batch sticker area.
Do you make dispenser boxes for sachets?
Yes, a box of 10 or 25 with a tear-open front.
Is the inside printed?
No, plain, so powder and crystal are never near ink.
Does it ship flat?
Cartons and sleeves do. Rigid boxes for bulk jars ship assembled.
Can I have a rigid box for a bulk jar?
Yes, with a flocked insert.
Do you ship outside the US?
Yes, to the United States, United Kingdom, Canada and Australia, quoted in the delivery currency.
Same range
